Stainless steel 304 case flow meter
glass tube flow meter
sanitary flow meter

stainless steel 304 case flow meter with glass tube inside

Glass rotameter flow meter is used to measure the instantaneous single- phase nonpulsating flus of liquid or gas in pipes in areas sush as chemical, petroleum, medicing, fertilizer, food, sugar refinery, paper making, light industry, textile, printing and dyeing environmental protection etc. ptfe the high quality corrision resistant material is used at the main contact parts of the corrosion resistant glass rotameter flow meter to contact the medium. it has a very good performance of corrosion resistance in measuring various kinds of flow of strong acid (except hydroflucric acid) alkail, oxidant, strong oxidation acid organic solvent and other corrosive gas liquid.

This model flow meter is one type of glass rotameter, it has higher measure accuracy, diversiform connections.
We can provide mm gradation scale, percentage scale, replaceable scale with flow units.

DFA-AT, DFA-T series ( Old model : LZM-ZT )

This series flowmeter is clear viewing type with SS valves to adjust the flowrate in a large measuring range.
It is featured in a beautiful look and easy installation.

DFG-4T6T8T Series flow meter

This model flow meter is fitting for measure and adjust small flow rate,it have compact configuration.
A specially designed fitting permit easy to read .It can be connected with hose or metal pipe.

Buddhist nun (KROHNE ), different according to his use , structure characteristic ,
way of installing, there are ordinary types, able to bear a lot of variety of rotten type ,
a modes in Chinese operatic music, suitable for small flow measurement.

These models are manufactured the same as the special technique and equipment of
KROHNE company in German.In addition to the mm graduation scale and percentage scale on the glass cone, a replaceable scale with flow units can on request be fitting to the housing.
VA20 have screw connection, FA20 have flange connection, SA20 have hose connedtion.

DH250 series variable area flowmeter is a kind of measuring meter which has local indication type and LCD displaying instantaneous/ accumulated flow rate, upper-limit and lower-limit alarm output, accumulative pulse output, batch control, standard two-wire 4-20mA current output, HART communi-cation, ect. Our product is good replacement of Krohne H250, ABB FAM540 and other similar rotamet- ers and widely used in the process control of industrial automation.

FEATURES

High accuracy of ±0.2%,±0.3%,±0.5%, low power consumption, stable zero point, easy parameter setting,
total and instantaneous flowrate, velocity and percentage of flowrate.

Two-direction measurement for forward and reverse.

Not effected by the change of the fluid condition such as density,viscosity,temperature,pressure and
conductivity, and the signal output of inductive voltage is linear to average velocity.

No obstacle parts in the meter tube so that no extra pressure loss.

Various liner and electrode can be selected to satisfy most industrial applications.

ANSI, DIN,DN flanges available .

IP65 and IP68 Protection class is available, and the sensor can sink into the water

FEP Liner is suit for vacuum tube.

Only Two Moving Parts

Higher Accuracy, 0.5% or 0.2%.

Standard Viscosity up to 5,000 cP (Centipoises = mPa.s).

Size of wide flow ranges 0.04-340 M3/h (18-37,396GPM).

Wide range of working environment –20 ~ +280 Deg C

DH500 digital Turbine flowmeter

The precision Darhor's LWGY Series turbine flow meter offers outstanding accuracy and reliability.
With rugged stainless steel body, the turbine flow meter is compatible with most chemicals and will
stand up well to high pressure applications.With high pressure ANSI 150# RF flange connections.