รหัส : 1φ1W or 3φ2W SCR Pow

ยี่ห้อ : Conch

รายละเอียดย่อ :

Product ID :
CR2

Product Description :
CR2: 1φ1W or 3φ2W - 35A, 50A, 75A, 100A, 125A, 150A, 180A, 225A, 300A, 380A

Product Features :
(Some functions depending on the model)
1.) Fully digital operation displaying, rich error detection and protection functions.
2.) Has phase-sequence tracing function to avoid phase-sequence problem.
3.) Has the functions of power phase failure, fuse blowout, SCR puncture and heater disconnection detection. (035, 050 and Inductive load types do not have the functions of SCR puncture and heater disconnection detection functions).
4.) 6 kind input signal types for optional: - 0~5V, 1~5V, 0~10 V, 2~10V, 0~20mA, 4~20mA.
5.) Can set the soft start time, response speed time, maximum value and minimum value.
6.) Has input command and temperature displaying function.
7.) Full function model including RS-485 communication function and current displaying, can set overload, under load and 3-phase unbalanced detection function.

รายละเอียดทั้งหมด :

 Model Explanation : 

CR2 Control Output (1φ1W or 3φ2W)	D (A)	2 (4)	035..	P (Z)
	Function	Voltage	Current	Control Mode
	D: Standard            A: Full function   (current detection)   V: Full function   (Voltage detection)   (developing)   W: Full function   (Power detection)   (developing)	2: AC180/260V      4: AC340/480V	035:  35A      050:  50A      075:  75A      100:  100A      125:  125A      150:  150A      180:  180A      225:  225A      300:  300A      380:  380A	Phase control / Zero cross Control   can be free planned

Product Specifications :

Main Power	180V/260V, 340V/480V ±15%, 50/60Hz
Control Power	200~240VAC (fan included), 90~240V AC/DC (fan non-included)
Rated Current	35A, 50A, 75A, 100A, 125A, 150A, 180A, 225A, 300A, 380A
Control Mode	Phase trigger control / Zero cross control can be free planned
Control Signal Vcmd	0~5V, 1~5V (impedance 20K), 0~10V, 1~10V (impedance 100K), 0~20Ma, 4~20Ma (impedance 250ohm)
Output Control Range	0.0~100.0%
Resolution / Linear	0.1% / 1%
E. ADJ Control Signal	Analog control: 0~5V (impedance 20K) respond to 0.0~100.0%, on/off control: HI=3.4V, LO=2.2V
Serial Communication	RS-485 interface, support ModBus protocol, RTU or ASCII format
Cooling Method	Nature cooling or fan cooling
Ambient Temperature / Humidity	-10~+50°C / under 90% RH
Hi-pot Test	AC2000V/ 1min. (between the power, signal terminal and heat sinks)
Noise Susceptibility	2KV, 5KHZ
Isolation Resistor	over 20MΩ/500V (between the power, signal terminal and heat sinks)
Housing Material	ABS (UL94V)

 

หากสนใจ กรุณากรอกรายละเอียดเพื่อติดต่อกลับ
ชื่อ-นามสกุล :	*
เบอร์โทร. :	*
หัวข้อ :	*
รายละเอียด :
E-mail :	*