รหัส : PT124B-3503

ยี่ห้อ : zhqy

ไฟล์เอกสาร : 20171101165747_26410.pdf

รายละเอียดย่อ :

Description

The diaphragm seal of PT124B-3503 differential remote pressure transmitter is used to prevent medium from entering directly into the pressure-sensing assembly of the pressure transmitter. It is connected to the transmitter using capillary filled with fill fluid, such as silicon oil. The model PT124B-3503 can be used to measure liquid, gas, or stem flow, as well as liquid level, density and pressure. It outputs a 4 to 20mA DC HART signal corresponding to the measured pressure differential. The model PT124B-3503 also features remote setup and monitoring though communication with the model RST375 TERMINAL or RSM100 Modem. PT124B-3503 with span range (non migration) is 0 to 1KPa to 2MPa, and the rated pressure of the liquid level flange is 1.6/4MPa, 6.4MPa, 10MPa, 150psi, 300psi or 600psi.

รายละเอียดทั้งหมด :

Features

Strong anti-jamming performance

Accuracy +/-0.075%

Advanced stability and static pressure performance

Error less than +/-0.1%/10MPa

Internal integrated high sensitivity temperature transducer

Perfect thermal drift

Fast response time

Specification

Measurement   parameter	Differential   pressure, liquid level
Measurement   range (Non migration)	0-1KPa-2MPa
Accuracy	+/-0.1%
Wetted   parts material	SS316L,   Hastelloy C, tantalum
Output	2-wire   4-20mA, HART communication optional, linear output or square root output   available
Ambient   temperature limited	Lowest:   depending on the filled liquid Highest:   85℃ -20~65℃   (with LCD display, fluorine rubber O-ring)
temperature   limited	-30~400℃
Protection   grade	IP67
Electrical   connector	M20*1.5   cable sealing buckle, terminal suitable for 0.5-2.5mm2  cable
Process   connector	7/16   female at the low pressure, compatible with ANSI or DIN at high pressure.   Directly install.

หากสนใจ กรุณากรอกรายละเอียดเพื่อติดต่อกลับ
ชื่อ-นามสกุล :	*
เบอร์โทร. :	*
หัวข้อ :	*
รายละเอียด :
E-mail :	*